Used HP Z440 AutoCAD E5-1620 V3 4 Cores 3.5Ghz 32GB 1TB SSD K620 Win 10

AutoCAD workstations are designed for optimal performance to give you the power you need to efficiently complete your work. Recommended for performance: Processors Speed ?C Faster the better. Recommend 3Ghz or higher. Processor Cores ?C Higher core counts are only utilized when rendering. We recommend 4 cores or more. Memory (RAM) ?C 20x of your compacted central project file is a good rule of thumb. Recommend 16GB or higher. Storage ?C Faster drives will improve overall workstation responsiveness. Its recommended to use a SSD for the Operating system and program loading, and HDD for file storage. Graphic Card (GPU) – Dedicated video cards supporting DirectX 11 or later are strongly recommended. Nvidia Quadro are supported and certified by AutoDesk. This workstation is certified to work with AutoCAD Processor: Single Intel Xeon E5-1620v3 Quad Core 3.5Ghz Processor 4 Cores, 8 Virtual Cores in Hyperthreading Mode! (Additional processor configurations available) Memory: 32GB DDR4-2133 Memory. Supports up to 128GB of total memory, 8 DIMM slots for DDR4 ECC Registered Memory Storage: 1TB 6Gb/s SATA Solid State Drive Drive Bays: Up to two 3.5” or 2.5” (adapter needed for 2.5”) internal SATA, SAS or SSD hard drives 2 external 52.5” bays Raid Controller: On-board RAID Support RAID 0, 1, 10 (Factory integrated) Graphics: Nvidia Quadro K620 2GB GDDR3 Graphic Card, DirectX 11.2 (Certified Hardware for AutoCAD 2019) Operating System: Windows 10 Professional 64-Bit Pre-InstalledSoftware: AutoCAD Software is not included Power Supply: 525W power supply, 85% efficient Optical: DVDRW Drive Networking Integrated Intel I218LM PCIe GbEController Slots: Slot 1: PCI Express Gen2 x1 Full-height, Slot 2: PCI Express Gen3 x16 Full-height, Slot 3: PCI Express Gen2 x4 Full-height, Slot 4: PCI Express Gen3 x8Full Height, Slot 5: PCI Express Gen3 x16 Full-height, Slot 6: PCI 32bit/33MHz Full-height Front Ports: 4 USB 3.0, 1 Headset, 1 Microphone Rear Ports: 4 USB 3.0, 2 USB 2.0, 2 PS/2, 1 RJ-45 (NIC), 1 Audio Line-In, 1 Audio Line-OutSerial supported with optional connector on PCI bracket cabled to system board connector Internal Ports: 2 USB 2.0 ports available with a single 2×5 header The 2×5 header can be converted to a standard(Type-A) USB connector through the use one HP Internal USB Port Kit (EM165AA) This port kit uses onehalf of the 2×5 header The 2×5 header also supports up to one 15-in-1 Media Card Reader1 USB 3.0 port available by a 2×10 header Peripherals: Power Cable Included Mouse, Keyboard, and Video Cable Not Included Condition: Seller Used unit may have minor scratches and scuffs *Systems are built to order and fully customizable. Please call for more information. Note that a stock photo is used and unit may differ depending on configuration.